机油过滤器的更换
Oil filter replacement
新机第一次运行500小时后应更换机油芯，用专用扳手反旋油滤芯取下，新滤芯装上前最好加螺杆机油，滤芯密封用双手拧回油滤座，用力拧紧。 建议每1500-2000小时更换新滤芯，换机油时最好同时更换油滤芯，在环境恶劣时使用应缩短更换周期。 严禁超期限使用机油滤芯，否则由于滤芯堵塞严重，压差超过旁通阀承受界限，旁通阀自动打开，大量赃物、颗粒会直接随机油进入螺杆主机内，造成严重后果。 柴动螺杆机柴油机机油过滤芯及柴油过橡胶托辊 槽型托辊 皮带托辊 平行托辊 保定搬家 保定搬家电话 保定搬家公司 保定搬家 铜鼎 铜狮子 滤芯的更换应遵循柴油机保养要求进行，更换方式与螺杆机油芯类似。
After the first 500 hours of operation of the new machine, the oil core shall be replaced, and the oil filter element shall be removed with a special wrench. Before the installation of the new filter element, screw oil shall be added, and the sealing of the filter element shall be screwed back to the oil filter base with both hands and tightened with force. It is recommended to replace the filter element every 1500-2000 hours. When changing the oil, it is better to replace the oil filter element at the same time. When using in bad environment, the replacement cycle should be shortened. It is strictly forbidden to use the oil filter element beyond the time limit, otherwise, because the filter element is seriously blocked and the pressure difference exceeds the bearing limit of the bypass valve, the bypass valve will automatically open, and a large number of dirt and particles will directly enter the screw main engine with the oil, causing serious consequences. The replacement of diesel engine oil filter element and diesel filter element shall follow the maintenance requirements of diesel engine, and the replacement method is similar to that of screw oil core.