空气压缩机气路循环系统
Air circuit circulating system of air compressor
压缩机工作时，空气经过自洁式空气过滤器被吸入，通过PLC自动清洗过滤器，空气在经过进口导叶自动调节后进入一级压缩，经一级压缩后的气体温度较高，然后进入中间冷却器进行冷却(水走管内，气走管外，中冷器的水流量要求为110m/h)之后进入二级压缩系统，为避免系统中的气体倒入压缩腔内(避免带压起动)在压缩机的排气管道安河北立体车库 消防报警器塑料配件 电缆接地箱 电缆保护接地箱 塑料土工格栅 消弧线圈装置 装有一只悬挂全启式止回阀，压缩机排出的气体推开止回阀进入排气消声器，然后进入一级后冷器，二级后冷器，再进入排气主管道。
When the compressor is working, the air is inhaled through the self-cleaning air filter, and the filter is cleaned automatically by PLC. The air enters the first stage of compression after being automatically adjusted by the inlet guide vane. The temperature of the gas after the first stage of compression is higher, and then enters the intercooler for cooling (the water goes in the pipe, the air goes out of the pipe, and the water flow of the intercooler is required to be 110m / h), and then enters the second stage of compression system, In order to avoid the gas in the system pouring into the compression cavity (to avoid starting under pressure), a suspension full open check valve is installed in the exhaust pipe of the compressor. The gas discharged from the compressor pushes the check valve to enter the exhaust muffler, then into the primary aftercooler, the secondary aftercooler, and then into the main exhaust pipe.