空气压缩机的安装场所选择
Selection of installation site of air compressor
1．空压机安装时，须宽阔采光良好的场所，以利操作与检修。
1. When installing the air compressor, it is necessary to have a wide and well lit place for operation and maintenance.
2．空气之相对湿度宜低，灰尘少，空气清净且通风良好，远离易燃易爆，有腐蚀性化学物品及有害的不安全的物品，避免靠近散发粉尘的场所。
2. The relative humidity of the air should be low, with less dust. The air should be clean and well ventilated. It should be far away from inflammable and explosive materials, corrosive chemicals and harmful and unsafe materials. It should be avoided to be close to the place where dust is emitted.
3．空压机安装时，安装场所内的环境温度冬季应高于5度，夏季应低于40度，因为环境温度越高，空气压缩机排出温度越高，这会影响到压缩机的性能，必保定平面设计培训 保定室内设计培训 保定空调移机 保定太阳能维修 保定厨房排烟 雄安管道通风 要时，安装场所应设置通风或降温装置。
3. When installing the air compressor, the ambient temperature in the installation site shall be higher than 5 ℃ in winter and lower than 40 ℃ in summer, because the higher the ambient temperature is, the higher the discharge temperature of the air compressor will be, which will affect the performance of the compressor. If necessary, the installation site shall be equipped with ventilation or cooling devices.
4．如果工厂环境较差，灰尘多，须加装前置过滤设备。
4. If the factory environment is poor and there is much dust, the prefilter must be installed.
5．空压机安装场所内空压机机组宜单排布置。
5. The air compressor unit in the air compressor installation site should be arranged in a single row.
6．预留通路，具备条件者可装设天车，以利维修保养空压机设备。
6. Reserve access roads, and install the crown block if conditions permit, so as to facilitate the maintenance of air compressor equipment.